Browse the most common questions and expert answers about Practical Guide on the Tuya IoT Platform.
Hello, you can delete the notification number by following the path below: App-【Assistant】—【SMS and Call Notifications】—【Set Recipient】, find the corresponding number, swipe left and tap 【Delete】 to delete the number.
Hello, you can add a notification number by following the path below:App - [Assistant] — [SMS and Call Notifications] — [Set Recipient], tap [+] to add a notification number.
Use the redirect API. Example: redirectTo or router.replace(url: string). url: string (The page path to redirect to).
Setting not supported.
Click "AI Large Model" to enter the "My Agents" page Click "Add Agent" and select "DeepSeek".
Follow these steps to add a room: Open the App homepage and tap the menu icon (☰) in the upper right corner; Select Manage Rooms from the pop-up options to enter the room list page; Tap the Add Room button at the bottom of the page to create a new room. Follow these steps to delete a room: Open the App homepage, tap the menu icon (☰) in the upper left corner and select Manage Rooms to enter the list page; Tap the Edit button in the upper right corner of the page to enter the room sort adjustment and deletion mode; Tap the delete button on the left side of the target room to remove the unwanted room.
Hello, after entering the App's "Homepage", tap the house icon in the upper left corner to switch.
Enter Edit Mode: Tap the menu icon (☰) in the upper right corner of the home page, select Manage Rooms from the pop-up options to enter the room list page. Tap Create Room Group and set a name (e.g., "Living Room Group"). Add Rooms: Tap the created room group, select existing rooms or tap Add Room (enter the name + select the room group) to complete the classification.
0 degrees in the temperature calibration function indicate no calibration is needed. Positive numbers indicate the actual temperature is lower than the standard value, while negative numbers indicate the actual temperature is higher than the standard value.
This recording function requires the App to keep running in the background. Closing the App (or ending the App process) will directly terminate the recording, so the recording will stop after you exit the App.
Can.
The line is still 3 wires, and the white light is achieved by reversing the power supply wires of the colored light (reversing the positive and negative poles).
The logs of the leakage protection and the water immersion are separate. If changes are needed, a requirement change assessment is required. It is currently decided not to make any modifications.
Hello! A maximum of 20 home members can be added to one home, and there is no limit to the number of Administrators.
Yes, you can use these React features and libraries.
Please rename the package according to the instructions on the page.
Simply change the demo name and then recompile.
The system Toast does not include an obscuring layer. It is recommended to use the Toast component from Smart-UI instead to prevent multiple toasts from appearing with consecutive clicks.
The current no-code development solution does not have over-temperature protection. If over-temperature protection is required, it is recommended to go through a customized process.
The drying time can be customized according to your own needs.
Supports uploading videos with a resolution of 2592*1944.
Generally, when transmitting audio and video streams, the parameters are passed incorrectly. Check the parameter RING_BUFFER_USER_HANDLE_T when calling the video transmission interface.
Tuya connects to data from third-party developers, and the third-party connects to data from the official website, so the data is also accurate.
When calling tuya_ipc_ss_init to initialize local storage, add the TUYA_IPC_SKILL_DOWNLOAD capability to skills.
The same template is used to create message push content without creating it specifically for iOS or Android.
app_config.h is automatically generated and cannot be modified. If you need to modify macro configurations, please click the demo directory, then right-click to select config project, and configure the relevant items in the graphical interface.
Please download the latest version of the Debug Assistant. Subsequent versions of the Debug Assistant will be integrated into the production solution.https://developer.tuya.com/en/docs/iot/SCJJ-01?id=Kcpv15oujgz00.
It will not, it will wait for the next IDR frame to decode again.
Hello, the knowledge of Tuya All-in-one App will be updated with the iteration of the All-in-one App, but your App will not necessarily be updated with the All-in-one App, so the knowledge does not have the function of related updates. It is recommended that you based on the existing App Features manage your knowledge.
PackgeName: Enter the package name of your app. SHA-1certificate fingerprint: Log in to Tuya Developer Platform and obtain the value in the app function configuration area.
Mark the recorded knowledge as an FAQ on the Tuya developer platform. The knowledge will be displayed on the app's FAQ page in 30 minutes.
Check whether you are using a test app package. If so, the pre-release content of the Tuya or SmartLife App is displayed. Only if you use an official app package, data you created online can be associated with your app.
In China: Huawei, Xiaomi, Meizu, XG, OPPO, and Vivo Outside China: FCM.
Yes.
This scheme can only display power generation or power consumption. To display power generation, it needs to be connected to the power generation equipment, and to display power consumption, the load should be connected to the socket output end.
Dear user, we are sorry for your inconvenience. Our App has not yet adapted the accessibility features on iOS and Android, so you may encounter compatibility issues such as inability to read aloud when you use it.
You can log in Tuya developer platform and click the icon like below screenshot:.
The maximum number of shared users is 20, but there is a limit to simultaneous previews, estimated to be around 2-3.
Set the browser settings in the personal center of the Home Assistant system to the [Light] theme, not the [Dark] theme.
Calculate according to the type of power statistics, such as sum type, such as minus, and calculate through cloud algorithms.
The IIC scheme can be used to control multiple street lamps through SDA and SCL signals. Common solutions on the market include Mingwei SM2235, Jingfeng BP5758, and Biyi KP18058.
Pour cat litter to completely cover the soft tray inside the drum, using approximately 8 liters. This amount ensures comfort for the cat while also providing optimal deodorizing and clumping effects, and prevents waste.
The Cat Toilet is set for delayed cleaning to provide the cat ample time after using the toilet, allowing the litter to fully absorb urine and clump better. This way, during subsequent cleaning, you can accurately scoop clumped litter, preventing waste from cleaning too early, and also making the cleaning process more efficient, maintaining the Cat Toilet experience.
Go to the overview page of the project. The authorization key is displayed.
2pc dustproof (need to mark the hole position), 2pc waterproof.
Yes, all are supported by default.
Up to 32.
Yes, you can delete videos from cloud storage; however, please note that videos uploaded within the last hour cannot be deleted.
Reason:Currently, there are no other members in the family, so the transfer cannot be completed. Solution:It is recommended that you invite the person to be transferred to join the family first, and then proceed with the transfer.
There are two methods: 1) Host-based testing 2) App-based testing.
Hello, the valid period is 3 days.
Hello, currently, up to 100 phone numbers can be added.
It is two-way.
Commonly used models include: BL0937, BL0942, HLW8012, HLW8032. You can view the supported metering chips by creating products on the Tuya Developer Platform.
The power consumption is low, but the network delay is high.
Yes, it is with a beacon remote control.
When this error message appears, it indicates that a title with the same name already exists in the knowledge base. It is recommended that you check the content of the knowledge base.
Root Cause Analysis: The third-party plugin Bartender is not activated. Solution: Activate the Bartender tool, and the activation status can be checked in the Help menu of Bartender under About.
App record and independent domain name are only supported on App branches 5.5.0 and above.
Yes. When debugging with the MG21 platform, the compilation script has already completed the IAR project configuration, and generally does not need to be modified. To enter the debugging interface, you need to select the Cortex-M33 core.
PHY622X platform requires installation of keil v5.26 version MG21 platform requires installation of IAR for ARM8.4 version MG24 platform requires installation of IAR for ARM9.3 version TLSR8258 platform development framework comes with its own compiler toolchain, not dependent on external compilers.
This is not a mandatory field, you can choose whether to upload it or not based on your situation.
Currently, the app market does not mandatorily require a public security filing, but it is recommended to complete the public security filing after the app is launched.View the public security filing tutorial.
It's not necessary. A brand new app that has never had an iOS certificate made will need to go through the process of creating one. If your app already has a certificate, there's no need to create it again.
Not required.
For example: Suppose you have a domain name A, and domain name A is configured with DNS to serve as the official website domain. If you use domain name A again to configure an app, you would need to configure DNS again, which would create a conflict.
The mobile phone and the hub must be on the same LAN.
After you connect the Android Debug Bridge (ADB), run the commandtail -f /tmp/tuya.logto read the log.
Considering the actual usage scenario of the customer, the light switch does not support power-off memory.
The traditional rocker switch can be realized by adding an smart switch. At present, we have a compound multi-channel switch solution (3 wall wall switch and 1 channel fan speed switch compound) that can be recommended to customers.
Tuya supports inserting videos from Bilibili and YouTube. The method is as follows: 1. Click the video button in the editor 2. Click "Share-Embed", and then copy the URL in the red box.
Hello, you can configure on the platform: App configuration second step: Function-Expansion Configuration-About US.
Yes, the hotspot owner can contact business for processing.
The wall switches currently supported by Tuya include touch button switches, tactile switches and rocker switches.
You can open both at the same time; also, the router SSID needs to be set correctly.
The duration of the dim light starts from the end of the induction delay and can be adjusted within a range of 1min~8h; it supports constant dim light.
Sorry, Xamarin is not supported.
The button mode is divided into short press, long press, and combo. When the button is pressed three times or more continuously within 1s, it is recognized as a combo action, and the combo action is usually not configured with a key function.
You cannot specify one email address per product for each function. Currently, you can specify multiple email addresses to receive messages.
You can add RC to the touch port to adjust the touch sensitivity.
Analysis: Network would cause video stuck and jump seconds. Instruction: check the network status, it's suggested to turn off other software that occupying too much bandwidth.
There are differences in each light bead, need to adjust the gamma value according to the actual hardware.
2 months.
Yes, you can provide packaging drawings or specify your design requirements.
Yes, you can provide packaging drawings or specify your design requirements.
Yes，for details, visit https://developer.tuya.com/en/docs/iot/quick-start1?id=K95ztz9u9t89n.
The standard voltage in Thailand is 220 V, so electrical appliances that can be used in China can also be used in Thailand without a voltage adapter. However, most sockets in Thailand work with two-pin plugs only.
The SM2135E five-line IIC scheme can be used, and the dimming process has no flicker.
The internal circuit of the intelligent switch is disturbed, causing malfunction.
Yes.
Yes. If you have such requirements, contact Tuya business personnel or dial the Tuya hotline 400-881-8611.
You can customize the knowlegde base to display the question in 'Help Center' on IoT Platform.
After operating the switch on the App side, do not power off immediately, generally wait for 5-8s, and the power-off memory function can be realized after the state is written into the memory.
It will, an external antenna is needed.
From the time of resubmission for review after rejection, it can be calculated backwards. For example: Amazon skills submitted on February 10, February 13 was rejected and re-submitted, then the estimated time to put on shelf is within 1-2 weeks after February 13. The exact timeframe relies on third-party review, and Tuya can't control it.
The music rhythm is changed along with the App when receiving the audio signal through the microphone. When the phone is locked, the App can not receive the signal cannot continue the rhythm.
The content of the Tuya App general knowledge base does not support direct export. You can create your own private library and inherit the content of the Tuya library. The content of your own library supports export.
There is no limit.
Universal knowledge of Tuya public App will be displayed on the App side in the following two cases: Did not create your own app knowledge base Created my app knowledge base without associated apps Warm reminder: When you create an App knowledge base and associate an App, you need to add content in time, otherwise the App will be blank.
Hello, there are 2 ways to release the child lock: 1. Press the physical button 4 times within 5 seconds; 2. It will automatically release each time the power is turned on.
Please revise the knowledge and cancel the FAQ mark, and then mark it again, the app can be updated.
You can define it yourself and maintain it in the printing tool.
Increase the dead time in the time gap of the upper and lower tube switch.
On the main page of IoT management, there is a copy function to copy a product.
The chip in the power scheme uses high voltage to start or increase the starting current.
Check the circuit constant current dimming chip data: 1. CW circuit: Generally, two constant current dimming chips (or two linear chips) are used in non-isolated topology; the isolated constant voltage solution is generally two DC/ DC dimming or 2-channel MOS dimming 2. CCT circuit: Both are non-isolated circuits. Generally, a constant current dimming chip is used, plus a cold and warm light switch chip (such as BP5926).
After creating the product, you can configure the battery power sampling configuration according to your needs in the "hardware debugging" step, as shown below:.
Yes, every way can be used to reset.
In the Quick toggle settings section, you can configure a shortcut button for only one switch. In the Common functions settings section, you can configure a shortcut button for each switch to turn on or off each switch. For details, visit https://developer.tuya.com/en/docs/iot/configure-in-platform/advanced-features/quick-toggle?id=K93ixt0amerfg.
The hardware determines whether dual-control is supported. A wall switch that uses two relays supports dual-control.
Currently only supports HLW8012 and BL0937 two power statistics chips.
Yes, when setting the network indicator, just select the status of the indicator relay.
Some of the No-code development solutions for light strips support multiple buttons.
Yes. FireBase Cloud Messaging (FCM) on a mobile phone with Google services pre-installed can display notifications after apps are cleared.
Yes. A product test router can be disconnected from the Internet.
Yes, you need to repeat the production test with the test2 signal after completing the production test of test1.
Please try to change the router name to tuya_mdev_test2 to repeat the production test.
Try to make the socket no-load and close the relay. If there is only current value and no voltage value, then the SEL pin of the power statistics chip may be reversed.
Analysis: The unlocking ID is not bound to any family member. Advice: Check whether it is necessary to bind a family member to the unlocking ID.
Please power on the socket for more than 5S and then power on again.
Tuya provides the main picture page and details page for existing products to help customers quickly launch their products.
A knowledge base can be associated with an unlimited number of apps, whereas an app can only be associated with one knowledge base. To associate an app with another knowledge base, first unbind it from the currently associated knowledge base.
Analysis: if the write speed of the SD card not meet requirement, it only support low quality video storage Instruction: suggest to use the high speed SD card, write speed &rt; 20MB/s.
The disadvantages of NB-IoT communications is: Expensive, complex deployment, and low bandwidth.
The NB-IoT network latency is about 10s. However, in an environment with the maximum coupling loss, the NB-IoT network latency is about 6s.
NB-IoT improves the uplink capacity by 50 to 100 times when compared with 2G, 3G, or 4G. Under the same base station, NB-IoT can provide 50 to 100 times connections than existing wireless technologies. The simulated data shows that a single base station cell can support 50,000 NB-IoT terminals when the frequency is 200 kHz.
The NB-IoT RF bandwidth are 3.75kHz and15kHz. The downlink rate is between 160 kbit/s and 250 kbit/s. The uplink rate is between 160 kbit/s and 250 kbit/s (multi-tone) or 200 kbit/s (single-tone).
The PCI of NB-IoT refers to the physical cell identity. It is used to distinguish the wireless signals of different cells to ensure that there will not be the same PCI in the coverage of the cell.
It uses a license frequency band, which is an operator frequency band.
Non-isolated solution, voltage sampling adopts resistor divider method, the resistor needs to use 0805 package. HLW8012 can not work under 3.3V power supply, because the 8 pin of the chip will be higher than 4V, it is considered as high level.
In the latest app version, a map is required. For details about how to configure Google map in the app, visit https://developer.tuya.com/en/docs/iot/app-development/oem-app/map-service/google-map?id=K989rroslnbrz.
The status of the lamp is wrong, the power is wrong.
The first thing to understand is: .1 kWh = 1 kWh, that is, active power 1000W for 1 hour. The electricity consumption is 1 kWh. 1 kWh = 1000W*3600S=3600000J 1.P0(W): added during calibration The active power corresponding to the load 2.Freq (Hz）: the detected CF pulse frequency According to points 1 and 2 above, you can calculate the amount of power of one CF pulse, so that the power data can be obtained by counting the CF pulses .Electricity corresponding to 1 CF=P0/Freq*3600000.
You are advised to update Google Play Services to the latest version.
On your mobile phone, choose Settings Apps and Notifications. Select the current app and set the tone, vibration, notification, and banner display for the corresponding channel in Notifications. (The navigation path may vary with the mobile phone manufacturer.).
General 5V relay drive current is high.
Clock and data need to be connected to a pull-up resistor to 3.3V.
The Wi-SUN technology can be applied to smart public services, smart homes, smart buildings, smart factories, smart cities, smart street lights, and more.
The LED driver power supply may use analog dimming. The analog signal level corresponding to duty cycle 80% is already that of the maximum brightness supported by the LED driver chip. The analog signal level increases along with the increase of the brightness. However, the light is already the most bright, and therefore the brightness no longer changes.
Real-time traffic consumption query is supported for the NB-IoT and 4G network traffic cards.
That happens because the volume of the speaker is louder than the human voice. The microphone of the speaker cannot collect wake words, causing wake-up failures.
Analysis: some IPCs would compress the flow to improve the video streaming Instruction: check with the supplier if it's compressed.
You can contact your customer manager to activate the video cloud storage service, and the activation can be completed within 1 working day.
220Vac calibration, other voltages are accurate.
Solution： 1、Log in Firebase，find the App and click to enter. 2、Click “ Settings” ⚙ on the top left corner, continue to click “Project settings” 3、Select “General”，download the file by click on “google-services.json”. 4、Re-upload the downloaded Json file into Tuya IoT platform. Please click “Certificate configuration” to find “Google FCM”，and upload it on “Upload Json document”，and then Configure certificate.
Baby monitors support a maximum of 15 lullaby songs.
Mechanical doorbells and wireless doorbells are supported.
Check whether the following issues exist: The app installed in the mobile phone used to view the knowledge is different from the app selected during knowledge creation. The IoT environment for creating knowledge is different from the environment used by the app (preview or online).
Yes.
Make sure that the map_id of the uploaded map is different every time you start to clean, the map will be cleared, and the cleaning will start again.
They are real-time data for the current cleaning task.
Dear user, we are sorry for your inconvenience. Currently, our App does not support Android watches.
A true mortise lock has the core cylinder inserted in the lock body. A false mortise lock has the core cylinder outside the lock body. They have the same security level but different structural designs.
No. However, you can use the home or sharing feature to share a doorbell or peephole with others.
Support, the two route names can be set to be consistent.
To enter decimals for DPs, use the multiple for conversion. For example, to enter a two-digit decimal, ranging from 0 to 99.99, enter 0 to 9999 for the value range and 2 as the multiple.
Up to 30.
Dear user, we are sorry for your inconvenience. If you have been invited to join a home, you will receive a pop-up reminder in the App. You can choose to "Accept" or "Decline" the invitation. You will also receive a message in Message Center. If you accidentally close the message pop-up window, you can find a family waiting to join in "Me-Home Management". After clicking it, the "Accept" or "Decline" window will pop up again.
Dear user, we are sorry for your inconvenience. It isup to 50 characters.
Dear user, we are sorry for your inconvenience. Yes. If you set the end time earlier than the start time, the function stops taking effect at the end time in the next day, as shown in the following figure.
No. Currently, you can use Xiaodu only to control digital channels.
Dear user, we are sorry for your inconvenience. Currently, there is no limit on the number, so you can use it with confidence.
Yes, the no-development circuit breaker supports interlocking, which is used in scenarios such as motor forward and reverse control. Click the link to get the circuit breaker solution:https://solution.tuya.com/projects/CMa4sh5leia1jm.
Please check the documentation: https://developer.tuya.com/en/docs/iot/how-to-undertake-customer-oem-needs-through-tuya-iot-development-platform?id=K9dmivp7mpsuj.
Integrate the library implementation 'com.facebook.fresco:animated-gif:2.2.0'.
No, BL0937 is 3.3V power supply, HLW8012 is 5V power supply.
The platform currently supports only two calibration voltages: 120V and 220V.
Not supported.
Skill customization services allow you to control products on smart speakers through your branded skills, improving your brand influence.
Supported.
The map ID failed to be uploaded when a map is saved.
No, the platform creation product selection 120V can only be calibrated with 120V.
No, the platform creation product selection 220V can only be calibrated with 220V.
No.
You can get the URL on the platform by yourself.
Yes. You can configure a color temperature DP.
Yes, baby monitors support the lullaby function.
They apply to different working temperatures.
No support for now.
Dear user, we are sorry for your inconvenience. By default, weather data is obtained based on your home location. You can tap the weather display on the home page and then change the location, but be aware that this changes the location for the currently selected Home.
Dear user, we are sorry for your inconvenience. Other air quality indicators, such as PM2.5 and humidity, are displayed on the homepage only after you set the location of your home.
Dear user, currently, our App does not support the landscape mode.
Yes. For security purposes, a custom security chip is embedded in each smart door lock. This chip prevents communication between the App and door lock from being cracked.
No. However, you can use the home or sharing feature to share a smart door lock with others.
The single live wire version of the wall switch's minimum load per channel is closely related to the power of the load light and the power supply solution used internally. It is generally recommended to be no less than 5W.
Every time you press the button, an alarm is sent.
Hello, you can cancel the alarm on the App or press the reset button 3 times shortly.
The PM2.5 detector detects the nearby air quality. You can test multiple places to have a comprehensive assessment.
Dear user, we are sorry for your inconvenience. It is up to 25 characters.
Dear user, we are sorry for your inconvenience. In a LAN, the status of App widgets is updated within 1s.
The magnetic latching relay requires two drive signals.
Greater or equal to 5.42 is security baseline.
You can use the regression test mode, only need to test the failure cases and part of the main process use cases.
Yes, it is supported.
There is no built-in battery, you need to plug in the power directly.
No,. The web platform supports H.264 encoding only.
No.
No-development metering switch/socket has overcurrent protection.
It's suggested that you can check whether the milliohm resistor used for the current is connected to the AC circuit.
During the aging process, there are 5 cycles of power off and on with a 0.5-second interval for each cycle.
Try to make the socket no-load and close the relay. If there is only current value and no voltage value, then the SEL pin of the power statistics chip may be reversed.
You can query the monitoring data with different frequencies. The time length varies depending on the frenquency. For monthly data, you can view it for one year. For daily data, you can view it for one year. For hourly data, you can view it for seven days.
You can set a fade-in period in the range of 5 minutes to 2 hours at the minimum step size of 5 minutes. For example, if you want to wake up at 6:00 AM and set a 2-hour fade-in period, the nightlight will gradually light up from 4:00 AM to the preset or default brightness by 6:00 AM.
You can set a fade-in period in the range of 5 minutes to 2 hours at the minimum step size of 5 minutes. For example, if you want to wake up at 6:00 AM and set a 2-hour fade-in period, the nightlight will gradually light up from 4:00 AM to the preset or default brightness by 6:00 AM.
Yes. After modification, rebuild your app.
If the cleaning date cannot be obtained from the cleaning record, please obtain it from the data model: iOS: TuyaSmartDeviceModel's dpsTime, Android: read dpsTime from DeviceBean.
Dear user, we are sorry for your inconvenience. If you do so: Please turn off the power saving function in the settings, or add the App to the white list of the power saving function (if there is no white list function, you need to turn off the power saving function). Please lock the background process of the App on the background management page of the Android phone, so that the Android system will not automatically close the background process of the App (Android systems with this function can see the "lock" mark on the background process of the App ). Please allow the App to start automatically in the system settings of the Android phone, otherwise the Android system will periodically shut down the background process of the unused App, which will also affect the push of App. The following is the specific setting process of some common mobile phone brands. Samsung phone XiaoMi phone HUAWEI phone OPPO phone VIVO phone.
Dear user, we are sorry for your inconvenience. If you do so: Open our App Tap "me" option on the bottom of your screen Then tap “setting”; You will find “About” in this page Thank you for your support and understanding!
A wireless doorbell typically consists of a transmitter and receiver. The transmitter is the outdoor unit, that is, the doorbell button. The indoor unit, receiver, is used to receive signals and ring.
You can set the temperature through water heater's temperature setting button or through the App; Generally set to 38-39℃ in summer (when the ambient temperature is higher), 39-41℃ in spring and autumn, and 41-42℃ in winter (when the ambient temperature is lower).
Dear user, we are sorry for your inconvenience. It is up to 64 characters.
The same.
Confirm that the cocoapod is the latest version. Run the pod--version command to check the pod version, and confirm that the version is 1.3.0 or higher.
To parse images captured by the doorbell in notifications, use the hexadecimal to UIF8 converter tool.
Alice, Xiao Ai, and Tencent Cloud DingDang will not be displayed on the APP side.
Skill customization time mainly depends on the review time of the third-party platform, which is generally 20-30 working days.
The cleaning record of inertial sweeper is limited. At present, it is reported up to 3 times per hour. It is recommended that you optimize the reporting logic of your sweeper's report.
You can modify the value to 0 directly in the "Overcurrent protection current value" column.
Calibrate with 220V.
It represents the level of brightness and is displayed through several indicator lights.
Load power = 3W, shield current and power display.
No. The product quantity in a kit is determined by the kit configuration and cannot be changed.
Version-based distribution of active users.
Hello, you only need to click the "Save" button at the bottom of the page, then you can clear the App cache, log out and log in again to confirm whether the network configuration page is updated; this configuration item modification does not need to build an App.
Baby monitors support three lullaby playback modes: repeat, single track, and shuffle.
Yes, it needs hardware circuit support. For example, local RTC timing requires hardware circuit support.
Dear user, we are sorry for your inconvenience. It isup to 25 characters.
The supporting commands are as follows: Hey Google, turn on [removed] Hey Google, turn off [removed] Hey Google, is [removed] on / off ? Hey Google, set [removed] to percent Hey Google, brighten/increase [removed] Hey Google, dim/decrease [removed] Hey Google, Dim/Brighten [removed] by 50% Hey Google, set [removed] to （ color ） Hey Google, set [removed] to （color temperature） Hey Google, turn on / off lights in [removed] Hey Google, Turn on/off all of the lights Hey Google, Start [removed] Hey Google, Activate [removed].
Dear user, the App does not support this feature at the moment.
Yes. Sound detection and cry detection must be implemented on the baby monitors.
This is because the button does not have a pull-up or pull-down resistor, and the relay status is uncertain.
It depends on the platform. Typically, it takes about one month to connect to a platform for the first time.
Check the setting of the push method and whether your mobile phone allows the App to receive messages in the backend.
This is not supported for deletion and modification, it will not have any impact, you do not need to handle it.
Check whether the test environment push certificate is configured in the app. If not, configure the push certificate.
Similar to the attachment You can check the version of the component 'IQKeyboardManager' in your Podfile.lock file, you can upgrade to 6.0.3 and then retry.
Need to apply the warning sign from EN 62368-1 F.5 1.b, and add the relevant warning statement in the manual.
Yes.
Accurate to 0.001 after three decimal places.
You can also choose：BL0937 、 BL0942、HLW8012、HLW8032.
Please refer to the following figure：.
For non-home members, visit https://developer.tuya.com/en/docs/app-development/wifilock?id=Ka6o1ib591c1c#title-4-Create%20a%20Door%20Lock%20Member For home members, visit https://developer.tuya.com/en/docs/app-development/wifilock?id=Ka6o1ib591c1c#title-6-Update%20a%20Family%20Member%20Unlock%20Mode.
Clear the project and try again.
Customers who want to highlight their brand features and expand their brand influence.
Before obtaining the Google Play download link, the App must already launched on Google Play. Please refer to: Launch on Google Play. Two ways to get the App download link from the Google play： Method 1: Log in to the Google Play Console, click App, click [Go to Google Play to view],then you will enter a page whose URL is the App download link. Method 2： Search for the App name on the Google Play，Click the corresponding App, the new page is the Google download link.
Yes. Users can turn on or off the baby care lamp and adjust the brightness.
When you play a video stored in the cloud, check the output log. If "use r 1 jump to newest I frame" appears, the network bandwidth is insufficient, and the buffer duration exceeds the upper limit. If "memory insufficient to buffer data" is printed, the rate of output code streams exceeds 1.5 Mbit/s.
The multiple indicates the negative power of 10. For example, –1 indicate the –1th power of 10. In other words, –1 indicates one decimal, and–2 indicates two decimals.
Dear user, we are sorry for your inconvenience. No. The Do Not Disturb time range you set takes effect based on the time zone on your phone.
Dear user, we are sorry for your inconvenience. For security purposes, system risks are detected when you log in to the App. If a root access issue or an unauthorized access risk is detected, the App prompts you with a security reminder and you can decide whether to exit the App.
Dear user, we are sorry for your inconvenience. Our App supports IPv6 networks.
Install the doorbell transmitter on the wall near the doorframe or on glass doors. Do not install it on metal doors such as burglarproof and iron doors because metal blocks signals.
When a water leak detector is immersed in water (at least 0.5 mm deep), the two probes will short-circuit, and an alarm is sent. This detector only works with tap water because of its electroconductivity. It cannot be used for pure or distilled water that is non-conductive. If the detector is immersed for up to one hour, it sends an alarm every five minutes.
Yes, they support temperature and humidity alerts.
Yes, the upper limit is 255 bytes.
A session remains valid for 45 days.
The blocked will be calculated.
Yes. You can draw shapes with four or more edges as a detection area.
Yes. To implement this function, you must call the required interfaces.
No. Only one user can make a call at a time.
The app supports 6 months of cloud records.
The width and height of the map should be 0. Populating thepixarray is optional.
Yes, you can set the value to a number between 120 V and 220 V.
You can configure four control commands for lullaby playback control: pause, play, previous track, and next track.
Yes. To display temperature and humidity values, you must configure temperature and humidity DPs. Temperature and humidity values are shown in the top of videos.
Because there are other verification rules, click invalid to show the reason, as shown in the figure below.
Yes.
Yes. An enum value can contain a maximum of 30 characters.
Dear user, we are sorry for your inconvenience. It is up to 150 characters.
The message center only displays messages generated in the latest 30 days.
This is a distinguishing mark on the Android side to distinguish between domestic and international packages. The international package version number will have this mark after "(international), but the iOS side does not.
Dear user, we are sorry for your inconvenience. After a skill is bound, exit the skill binding page and refresh the App.
The door lock does not support creating groups for control.
This may be caused by the following reasons: the sweeping robot's switch is turned off, just turn it on again; The Appointment setting is unsuccessful, please reset the Appointment time. When the machine beeps, it means the Appointment setting is successful; The time setting is incorrect, the Appointment time is set according to the sweeper's running time, so if the robot's time is not set correctly, the Appointment time will also be incorrect. So you should set the current time before setting the Appointment time.
The amount of food, which is the minimum amount of grain output set for the product, cannot usually be changed. However, the grain output can be adjusted by adjusting the number of grain outputs or the number of times the grain is output.
The liters of gas water heater is determined by the heat load, the greater of the water heater liters, the more hot water produced by the same temperature. Generally according to the number of water points to choose. For example, a 13L water heater can meet 1 bathroom and 1 kitchen at the same time, 18L water heater can meet 2 bathrooms and 1 kitchen at the same time.
No.
Scheduled tasks are divided into scheduled groups and regular schedules. If taskName is set when creating a scheduled task, it is a scheduled group. You need to pass taskName when getting it, otherwise you will not get any data. If you do not pass taskName when creating it, you do not need to pass it when getting it either.
We build white-label Tuya apps, IoT dashboards, and custom integrations for your business.
🚀 Schedule a Call